TOPCON

http://www.mavinci.de/images/Topcon.jpg

ES Series

Topcon’s new ES Series Total Stations – New Advanced Design with Superior Technology
The new ES Series was designed from the ground up to deliver the very latest technology advantages, all in a small, sleek design – you’ll appreciate the advantages from the very first measurement.
Featuring a class leading EDM unit, the ES is able to measure up to 4,000m to standard prisms, and can measure in reflectorless mode up to 500m at an incredible 3mm + 2ppm accuracy.
Measurements are carried out faster than ever, and at 15mm (over 30m), the bright red laser dot pinpoints features with ease.
World’s First TSshield™ Remote Security and Notification System
  • Disable your instrument remotely if lost or stolen
  • Get notified of Firmware updates
  • Online instrument operational history
  • See more here...
Ultra-Powerful, Advanced EDM
  • 500m non-prism range
  • 4000m prism range
  • Less than 1 second fine measurement

The exclusive LongLink™ communications functionality in every ES Series
model provides operational capabilities never before offered in a manual total
station. With a 300m range wireless communication using Bluetooth Class
1 technology, you can now operate the data collector from the “smart-spot”
of the crew, the prism pole. Also referred to the two-man, economical robot
solution, Topcon’s new LongLink™ technology brings a whole new level of
flexibility to your manual field crew.
Advanced Angle Encoder System
  • “Best in Class” 1” angle accuracy available
  • Incorporates exclusive IACS (Intelligent Automatic Calibration System) on 1” & 2” models
Ultimate in Rechargeable operation - 36 Hours!
  • Up to 36 hours of operation on a single charge.*1
  • Eliminates the need for nightly recharging and carrying extra batteries.
  • Work with confidence all day without the worry of dead batteries.
Rugged, Waterproof Design
  • Waterproof/Dustproof IP66 design handles the toughest environments
  • Magnesium-alloy housing providing stable angle accuracy Completely
Easy Access USB 2.0 Memory
  • Up to 8MB storage
  • Environmentally protected
  • Compatible with industry standard accessories and cables
*1 Operating time may vary depending on environmental conditions and type of work being performed.
QUICK Specifications
Angle Measurement
Min. Resolution/Accuracy
ES-101 0.5”/1”
ES-102 1”/2”
ES-103 1”/3”
ES-105 1”/5”
ES-107 1”/7”
IACS (Independent Angle Calibration System) Standard om 1” & 2” models
Compensation Dual-axis compensator
Distance Measurement
Prism EDM Range 4000m (ES-107 3000m)
Prism EDM Accuracy 2mm+2ppm
Non-Prism Range 500m
Non-Prism Accuracy 3mm+2ppm (0.3-200m)
Measuring Time Fine: 0.9 sec
Rapid: 0.7 sec
Tracking: 0.3 sec
Communications
LongLink™ rover communications utilizing Class 1 Bluetooth
USB 2.0 Slot
RS-232C Serial
General
Display/Keyboard Dual, Graphic, Backlit
LCD (ES-107 Single)
Battery Operation up to 36 hours
Dust/Water Protection IP66
Wireless Connection Bluetooth Class 1
Operating Range -20C to +50C
-30C to +50C *
-20C to +60C **
* special arctic version
** special high temperature model
Click here for detailed specifications (HTML).
Click here to download detailed specifications (PDF).

2:40 min.
Topcon has re-envisioned the total station, with the most powerful and accurate reflectorless EDM available. The new ES from Topcon. Designed for productivity, with new and powerful technology in a sleek design that's easy to use.

Brochures

Manuals

ES Instruction Manua

Data Sheets

ES Full Specifications


Product Inquiry


**

GTS-250 Series

Unmatched value, performance and quality! The GTS-250 series combines Topcon's tradition of rugged field-ready quality and accuracy and places it in an economical, compact design perfect for everyday measuring and positioning applications.
Meeting or exceeding the precision and durability of most competitive high end models, Topcon's GTS-250 provides construction professionals and surveyors performing construction layout with a dedicated solution. The on-board software makes it easy to rapidly shoot points for quick adjustments or resets. For more advanced layout tasks use your GTS-250 with any of Topcon's field controllers running MAGNET™ software.
  • Economical, value priced measuring solution
  • Rugged, durable, water resistant design (IP54)
  • Two accuracies from which to choose: 2" and 5"
  • Dual-axis compensation
  • Onboard programs and 24,000 point data storage
  • Ideal as a construction stakeout total station
Totalcare Info Find a Dealer Brochure Ask Us
Specifications
Telescope
Length 150 Millimeters
Objective Lens Diameter 45mm (EDM:50mm)
Magnification 30x
Image Erect
Field of View 1°30
Resolve Power 3 "
Min. Focus Distance 1.3 meters
Measurement Range
1 Prism 6560 ft, 2000 meters
3 Prism 8856 ft, 2700 meters
Measuring Accuracy
Prism Mode ±(2mm + 2ppm x D)m.s.e. fine, N/A
Measurement Time 1mm: 1.2sec. (Initial 4sec.) fine, 0.2sec. (Initial 3sec.) coarse, N/A
Angle Measurement
Method Absolute Reading
Detection 2 horizontal, 1 vertical
Minimum reading 5”/1”, 1/5 mgon
Tilt Correction
Type Automatic Vertical and Horizontal compensator
Method Liquid surface reflective profile sensor reading type
Compensating Range ±3'
Correction Unit 1 arc sec, N/A
Computer Unit
Display 2 screen, dot matrix graphic LCD display
Power
Approximate battery life 9 hours including distance measurement , 40 Angle measurement only
Durability
Protection against water and dust IP54
Temperature -20 to 50 degrees C  (-4 to 122 degree F)
Weight Instrument  4.9KG (10.8lb)




Brochures

GTS-250 Series - Brochure

 **

Topcon GTS 100N Series Total Stations

GTS100N Series
  Reconditioned Topcon GTS-100N Series Total Stations
The new Topcon GTS-100N Series total station combines the traditional Topcon rugged field-ready quality and accuracy with economical, compact design that is perfect for everyday measuring and positioning applications such as topo and construction layout.
Features:
  • Economical, value priced measuring solution
  • Rugged, durable, water resistant design
  • Two accuracies to choose from 2" & 5"
  • Expanded, Full numeric keypad
  • On board programs & 24,000 point data storage
  • Ideal as a construction stakeout total station
  • Perfect when combined with FC field controller and software
The entry-level value choice is the GTS-100N. Built with legendary Topcon precision and durability, the GTS-100N provides the construction professional with a dedicated lay-out solution. Use the on-board software to layout points in the field, confident that with Topcon, you'll be right on target. Or use any of Topcon's field controllers running one of their range of software packages tailored to the tasks you want to perform.

BROCURE

 **


 

DT-200

The DT-200 series integrates the same high-quality advanced absolute circle reading technology found in Topcon's high-performance total station products for more accurate field calculations; and they continue to deliver the highest quality optics and electronics you expect to find in Topcon theodolites.

DT-200 Series Features:
  • Long Battery Life
  • Waterproof and Dustproof Digital Theodolites
Available in three affordable models delivering 5", 7", or 9" angle accuracy, there is a DT-200 theodolite perfect for any job. Like the DT-100 series, the DT-200 series weathers any wet or dust conditions in the field, allowing for a more productive day during inclement weather. All models are also compact and lightweight for easy portability; and their simple operation provides precise measurement in a functional, hassle-free package.
Specifications
Telescope
Length 149 mm
Objective lens 45 mm
Magnification 30x power
Field of view 1°30'
Resolving power 2.5 power
Minimum focus 90 cm
Stadia ratio 100
Stadia constant 0
Sighting collimator Double
Electronic Angle Measurement
Method Absolute Reading
Detecting 2 horizontal sides, 1 vertical sides
Minimum reading 1"/5" arc seconds, 0.2mgon/1mgon mgon
Accuracy 5 arc seconds, 71mm Diameter Circle
LCD 7 segments
Compensator
Sides 2
Serial signal connector RS-232C
Tilt sensor Vertical
Data Output
Serial signal connector RS-232C
Optical Plummet Telescope
Magnification 3x power
Field of view 3° degrees
Level Sensitivity
Plate level 40°/2mm
Circular level 10°/2mm
Water Protection
Standard IP66 rating
Power Supply
Battery 4AA batteries
Operating time Alk.
Theodolite only 140 Hours
Environmental
Operating Temp -20 to +50 degrees C

Brochures

Product Inquiry

**

 

DT-200L

The new DT-200L Series feature the same high-quality advanced absolute circle reading technology found in Topcon's high-performance total station products, and they continue to deliver the highest quality optics and electronics you expect to find in Topcon theodolites. All this, plus the addition of a laser diode that's perfect for easy, one-person alignment jobs.

DT-200L Series Features:
  • Long Battery Life
  • Waterproof and Dustproof Digital Theodolites
  • 633nm diode laser that can
  • be seen up to 50 meters away
  • outside in daylight
Available in three affordable models delivering 5", 7", or 9" angle accuracy, there is a DT-200L theodolite perfect for any job. They feature waterproof and dustproof construction that stands up to even the toughest conditions so you don't have to worry about downtime due to inclement weather. All models are also compact and lightweight for easy portability; and their simple operation provides precise measurement in a functional, hassle-free package.
Specifications
Telescope
Length 152 mm
Objective lens 45 mm
Magnification 30x power
Field of view 1°30'
Resolving power 2.5 power
Minimum focus 1m cm
Stadia ratio 100
Stadia constant 0
Sighting collimator Double
Electronic Angle Measurement
Method Absolute Reading
Detecting 2 horizontal sides, 1 vertical sides
Minimum reading 1"/5" arc seconds, 0.2mgon/1mgon mgon
Accuracy 5 arc seconds, 71mm Diameter Circle
Laser Pointer
 Method Focusing
 Wave length/Power 633nm/0.6mW
Display
Display sides 2
LCD 7 segments
Data Output
Serial signal connector RS-232C
Compensator
Tilt sensor Vertical
Compensating range ±3 ft
Optical Plummet Telescope
Magnification 3x power
Field of view 3° degrees
Level Sensitivity
Plate level 40°/2mm
Circular level 10°/2mm
Water Protection
Standard IP66 rating
Power Supply
Battery 4AA batteries
Operating time Alk.
Theodolite only 140 Hours
Laser only 80 Hours
Theodolite and laser 45 Hours
Environmental
Operating Temp -20 to +50 degrees C

Brochures

Product Inquiry


**


AT-B Series

AT-B Series – Auto Level
Utilizing a finely tuned magnetic damping system, AT-B series automatic levels quickly level and stabilize the line of sight. These precision instruments ensure reliable leveling even when working near heavy equipment or busy highways where fine vibrations could be present. The automatic levels feature IPX6 protection against powerful water jets from all directions and are fully resistant to driving rain and splashing water.
Horizontal angles can be directly read in 1º or 1gon units. Free rotation feature allows you to read any angle from zero. The circle is covered for protection against dirt and scratch. The readout window is located below the eyepiece for quick reading.
AT-B Series Features:

    •    Durable, Dependable, High Value Auto Levels
    •    3 Models - 32x, 28x, and 24x Magnifications
    •    Rapid, Accurate, and Stable Automatic Compensation
    •    Ultra-Short 20cm (7.9 in.) Focusing
    •    All-Weather Dependability
    •    Clampless, Endless Fine Horizontal Adjustments

Rapid, Stable, and Durable Compensator
The compensator of AT-B Series incorporates four suspension wires made of super-high-tensile metal that features minimal thermal expansion coefficient, providing unmatched durability and accuracy. Finely tuned magnetic damping system quickly levels and stabilizes the line of sight despite the fine vibrations present when working near heavy equipment or busy roadways.
Horizontal Circle for Angle Measurement
Horizontal angles can be directly read in 1º or 1gon units. Free rotation feature allows you to read any angle from zero. The circle is covered for protection against dirt and scratch. The readout window is located below the eyepiece for quick reading.
20cm (7.9 in.) - Ultra-Short Minimum Focus
The AT-B Series can focus on objects at 20cm (7.9 in.) in front of the telescope. This feature dramatically facilitates the works in confined spaces.

Specifications
TELESCOPE AT-B2 AT-B3 AT-B4
Length 215mm (8.46 in.) 215mm (8.46 in.) 215mm (8.46 in.)
Magnification 32X 28X 24X
Objective Aperture 42mm (1.65 in.) 36mm (1.42 in.) 32mm (1.26 in.)
Resolving Power 3 in. 3.5 in. 4 in.
Field of View 1°20’ 1°25’ 1°25’ (at 100m/328ft.)
(at 100m/328ft.) (2.3m/7.5 ft.) (2.5m/8.2 ft.) (2.5m/8.2 ft.)
Min. Focus from end of telescope 0.2m (7.9 in.) 0.2m (7.9 in.) 0.2m (7.9 in.)
Min. Focus from instrument center 0.3m (1 ft.) 0.3m (1 ft.) 0.3m (1 ft.)
Image Erect Erect Erect
Stadia Constant 0 0 0
Stadia Ratio 100 100 100
Focusing Knob 2-speed 1-speed 1-speed
Sighting Aid Peep Sight Gun Sight Gun Sight
ACCURACY AT-B2 AT-B3 AT-B4
Without Micrometer 0.7mm (0.03 in.) 1.5mm (0.06 in.) 2.0mm (0.08 in.)
With Micrometer 0.5mm (0.02 in.) n/a n/a
COMPENSATOR AT-B2 AT-B3 AT-B4
Type Pendulum compensator with magnetic damping system
Setting Accuracy 0.3 in. 0.5 in. 0.5 in.
Working Range ±15 ft. ±15ft. ±15 ft.
CIRCULAR LEVEL AT-B2 AT-B3 AT-B4
Sensitivity 10 ft./2mm 10 ft./2mm 10 ft./2mm
HORIZONTAL CIRCLE AT-B2 AT-B3 AT-B4
Diameter 103mm (4.1 in.) 103mm (4.1 in.) 103mm (4.1 in.)
Minimum Division 1°/1gon 1°/1gon 1°/1gon
GENERAL AT-B2 AT-B3 AT-B4
Water Resistance IPX6 (IEC 60529:2001)
Operating Temperature -4°F to +122°F (-20ºC to +50ºC)
Width 5.12 in. (130mm) 5.12 in. (130mm) 5.12 in. (130mm)
Length 8.46 in. (215mm) 8.46 in. (215mm) 8.46 in. (215mm)
Height 5.51 in. (140mm) 5.51 in. (140mm) 5.31 in. (135mm)
Weight 4.1 lbs. (1.85kg) 3.7 lbs. (1.7kg) 3.7 lbs. (1.7kg)

Product Inquiry